Mock Version: 5.5 Mock Version: 5.5 Mock Version: 5.5 ENTER ['do_with_status'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bs --noclean --target x86_64 --nodeps /builddir/build/SPECS/system-config-printer.spec'], chrootPath='/var/lib/mock/f41-build-50443233-6037132/root'env={'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8'}shell=Falselogger=timeout=201600uid=1000gid=425user='mockbuild'nspawn_args=['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.k883ru7_:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11']unshare_net=TrueprintOutput=False) Using nspawn with args ['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.k883ru7_:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', 'a6c84373ba084d1abb31bbb04abe355c', '-D', '/var/lib/mock/f41-build-50443233-6037132/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.k883ru7_:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', 'bash', '--login', '-c', '/usr/bin/rpmbuild -bs --noclean --target x86_64 --nodeps /builddir/build/SPECS/system-config-printer.spec'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1710892800 Wrote: /builddir/build/SRPMS/system-config-printer-1.5.18-9.fc41.src.rpm Child return code was: 0 ENTER ['do_with_status'](['bash', '--login', '-c', '/usr/bin/rpmbuild -bb --noclean --target x86_64 --nodeps /builddir/build/SPECS/system-config-printer.spec'], chrootPath='/var/lib/mock/f41-build-50443233-6037132/root'env={'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8'}shell=Falselogger=timeout=201600uid=1000gid=425user='mockbuild'nspawn_args=['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.k883ru7_:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11']unshare_net=TrueprintOutput=False) Using nspawn with args ['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.k883ru7_:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '0cc8a6553fa147d0b8c030828ced743b', '-D', '/var/lib/mock/f41-build-50443233-6037132/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.k883ru7_:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', 'bash', '--login', '-c', '/usr/bin/rpmbuild -bb --noclean --target x86_64 --nodeps /builddir/build/SPECS/system-config-printer.spec'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False Building target platforms: x86_64 Building for target x86_64 setting SOURCE_DATE_EPOCH=1710892800 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.sKHv7i + umask 022 + cd /builddir/build/BUILD + cd /builddir/build/BUILD + rm -rf system-config-printer-1.5.18 + /usr/lib/rpm/rpmuncompress -x /builddir/build/SOURCES/system-config-printer-1.5.18.tar.xz + STATUS=0 + '[' 0 -ne 0 ']' + cd system-config-printer-1.5.18 + rm -rf /builddir/build/BUILD/system-config-printer-1.5.18-SPECPARTS + /usr/bin/mkdir -p /builddir/build/BUILD/system-config-printer-1.5.18-SPECPARTS + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/bin/git init -q + /usr/bin/git config user.name rpm-build + /usr/bin/git config user.email '' + /usr/bin/git config gc.auto 0 + /usr/bin/git add --force . + /usr/bin/git commit -q --allow-empty -a --author 'rpm-build ' -m 'system-config-printer-1.5.18 base' + /usr/bin/git checkout --track -b rpm-build Switched to a new branch 'rpm-build' branch 'rpm-build' set up to track 'master'. + /usr/lib/rpm/rpmuncompress /builddir/build/SOURCES/0001-Fix-debugprint-in-options.py-fixes-291.patch + /usr/bin/git apply --index --reject - Checking patch options.py... Applied patch options.py cleanly. + /usr/bin/git commit -q -m 0001-Fix-debugprint-in-options.py-fixes-291.patch --author 'rpm-build ' + /usr/lib/rpm/rpmuncompress /builddir/build/SOURCES/0001-udev-Fix-exit-value-when-device-is-already-handled.patch + /usr/bin/git apply --index --reject - Checking patch udev/udev-configure-printer.c... Applied patch udev/udev-configure-printer.c cleanly. + /usr/bin/git commit -q -m 0001-udev-Fix-exit-value-when-device-is-already-handled.patch --author 'rpm-build ' + sed -i 's/setup.py install --prefix=$(DESTDIR)$(prefix)/setup.py install --root $(DESTDIR) --prefix=$(prefix)/' Makefile.am Makefile.in + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.OoAZUv + umask 022 + cd /builddir/build/BUILD + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd system-config-printer-1.5.18 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + '[' '-flto=auto -ffat-lto-objectsx' '!=' x ']' ++ find . -type f -name configure -print + for file in $(find . -type f -name configure -print) + /usr/bin/sed -r --in-place=.backup 's/^char \(\*f\) \(\) = /__attribute__ ((used)) char (*f) () = /g' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + /usr/bin/sed -r --in-place=.backup 's/^char \(\*f\) \(\);/__attribute__ ((used)) char (*f) ();/g' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + /usr/bin/sed -r --in-place=.backup 's/^char \$2 \(\);/__attribute__ ((used)) char \$2 ();/g' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + /usr/bin/sed --in-place=.backup '1{$!N;$!N};$!N;s/int x = 1;\nint y = 0;\nint z;\nint nan;/volatile int x = 1; volatile int y = 0; volatile int z, nan;/;P;D' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + /usr/bin/sed --in-place=.backup 's#^lt_cv_sys_global_symbol_to_cdecl=.*#lt_cv_sys_global_symbol_to_cdecl="sed -n -e '\''s/^T .* \\(.*\\)$/extern int \\1();/p'\'' -e '\''s/^$symcode* .* \\(.*\\)$/extern char \\1;/p'\''"#' ./configure + diff -u ./configure.backup ./configure + mv ./configure.backup ./configure + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + '[' 1 = 1 ']' + '[' x '!=' 'x-Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' ']' ++ find . -name ltmain.sh ++ grep -q runstatedir=DIR ./configure ++ echo --runstatedir=/run + ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --runstatedir=/run --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-udev-rules checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for a sed that does not truncate output... /usr/bin/sed checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking whether make supports the include directive... yes (GNU style) checking for x86_64-redhat-linux-gnu-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... none checking build system type... x86_64-redhat-linux-gnu checking host system type... x86_64-redhat-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking 32-bit host C ABI... no checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ELF binary format... yes checking for the common suffixes of directories in the library search path... lib,lib,lib64 checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyPreferredLanguages... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for a Python interpreter with version >= 3... python3 checking for python3... /usr/bin/python3 checking for python3 version... 3.12 checking for python3 platform... linux checking for GNU default python3 prefix... ${prefix} checking for GNU default python3 exec_prefix... ${exec_prefix} checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.12/site-packages checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.12/site-packages checking for x86_64-redhat-linux-gnu-pkg-config... /usr/bin/x86_64-redhat-linux-gnu-pkg-config checking pkg-config is at least version 0.9.0... yes checking for CUPS SERVERBIN dir... /usr/lib/cups checking for GLIB... yes checking for libudev... yes checking for libusb... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating po/Makefile.in config.status: creating system-config-printer config.status: creating system-config-printer-applet config.status: creating install-printerdriver config.status: creating dbus/scp-dbus-service config.status: creating udev/configure-printer@.service config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile config.status: executing depfiles commands + /usr/bin/make -O -j6 V=1 VERBOSE=1 Making all in . make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@datadir\@|/usr/share|" \ -e "s|\@localedir\@|/usr/share/locale|" \ -e "s|\@VERSION\@|1.5.18|" \ -e "s|\@PACKAGE\@|system-config-printer|" \ config.py.in > config.py make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' sed \ -e "s|\@bindir\@|/usr/bin|" \ dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' if [ "." != "." ]; then \ cp ./setup.py .; \ /usr/bin/mkdir -p cupshelpers; \ for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do \ cp ./$file $file; \ done; \ fi touch .stamp-distutils-in-builddir make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/mkdir -p cupshelpers sed \ -e "s|\@prefix\@|/usr|" \ -e "s|\@sysconfdir\@|/etc|" \ -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \ cupshelpers/config.py.in > cupshelpers/config.py make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/python3 setup.py build make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' xmlto man -o man man/system-config-printer.xml touch .stamp-man-pages-built Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer.1 Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso Note: Writing system-config-printer-applet.1 make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/msgfmt --xml --template system-config-printer.appdata.xml.in -d ./po -o system-config-printer.appdata.xml make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/msgfmt --desktop --template print-applet.desktop.in -d ./po -o print-applet.desktop make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/msgfmt --desktop --keyword=Name --keyword=GenericName --keyword=Comment --keyword=X-GNOME-FullName --template system-config-printer.desktop.in -d ./po -o system-config-printer.desktop make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.18\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.18\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.18\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I. -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-6 -pthread -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' udev/udev-configure-printer.c: In function ‘device_id_from_devpath’: udev/udev-configure-printer.c:856:10: warning: passing argument 1 of ‘g_free’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 856 | g_free(device_id); | ^~~~~~~~~ In file included from /usr/include/glib-2.0/glib/glist.h:34, from /usr/include/glib-2.0/glib/ghash.h:36, from /usr/include/glib-2.0/glib.h:52, from udev/udev-configure-printer.c:52: /usr/include/glib-2.0/glib/gmem.h:74:46: note: expected ‘gpointer’ {aka ‘void *’} but argument is of type ‘const char *’ 74 | void (g_free) (gpointer mem); | ~~~~~~~~~~~~~~~~~~^~~ udev/udev-configure-printer.c: In function ‘find_matching_device_uris’: udev/udev-configure-printer.c:1031:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1031 | cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ()); | ^~~~ In file included from /usr/include/cups/ipp.h:18, from /usr/include/cups/cups.h:28, from udev/udev-configure-printer.c:36: /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function ‘for_each_matching_queue’: udev/udev-configure-printer.c:1362:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1362 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function ‘enable_queue’: udev/udev-configure-printer.c:1553:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1553 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function ‘remove_queue’: udev/udev-configure-printer.c:1745:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1745 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function ‘disable_queue’: udev/udev-configure-printer.c:1777:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations] 1777 | http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (), | ^~~~~~ /usr/include/cups/http.h:477:26: note: declared here 477 | extern http_t *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead."); | ^~~~~~~~~~~~~~~~~~ udev/udev-configure-printer.c: In function ‘do_add’: udev/udev-configure-printer.c:840:5: warning: ‘strncpy’ specified bound 256 equals destination size [-Wstringop-truncation] 840 | strncpy (usbserial, serial, usbseriallen); | ^ make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' gcc -I/usr/include/libusb-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-6 -pthread -O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes -o udev/udev-configure-printer udev/udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0 -lglib-2.0 make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' Making all in po make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18/po' make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition make[1]: Nothing to be done for 'all'. + RPM_EC=0 ++ jobs -p + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Qh5p47 + umask 022 + cd /builddir/build/BUILD + '[' /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 '!=' / ']' + rm -rf /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 ++ dirname /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 + mkdir -p /builddir/build/BUILDROOT + mkdir /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 + CFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CFLAGS + CXXFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer ' + export CXXFLAGS + FFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FFLAGS + FCFLAGS='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules ' + export FCFLAGS + VALAFLAGS=-g + export VALAFLAGS + RUSTFLAGS='-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn' + export RUSTFLAGS + LDFLAGS='-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes ' + export LDFLAGS + LT_SYS_LIBRARY_PATH=/usr/lib64: + export LT_SYS_LIBRARY_PATH + CC=gcc + export CC + CXX=g++ + export CXX + cd system-config-printer-1.5.18 + /usr/bin/make install DESTDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 'INSTALL=/usr/bin/install -p' Making install in . make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/python3 setup.py build make[2]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18' /usr/bin/python3 setup.py install --root /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 --prefix=/usr /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. !! ******************************************************************************** Please avoid running ``setup.py`` directly. Instead, use pypa/build, pypa/installer or other standards-based tools. Follow the current Python packaging guidelines when building Python RPM packages. See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html and https://docs.fedoraproject.org/en-US/packaging-guidelines/Python/ for details. ******************************************************************************** !! self.initialize_options() /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/bin' /usr/bin/install -p system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/bin' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/metainfo' /usr/bin/install -p -m 644 system-config-printer.appdata.xml '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/metainfo' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/etc/cupshelpers' /usr/bin/install -p -m 644 xml/preferreddrivers.xml '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/etc/cupshelpers' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/etc/dbus-1/system.d/' /usr/bin/install -p -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/etc/dbus-1/system.d/' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/dbus-1/interfaces/' /usr/bin/install -p -m 644 dbus/org.fedoraproject.Config.Printing.xml '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/dbus-1/interfaces/' mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/applications/ mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/applications/ desktop-file-install \ --dir /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/applications/ \ --add-category System \ --add-category Settings \ --add-category HardwareSettings \ --add-category Printing \ --add-category GTK \ system-config-printer.desktop desktop-file-install \ --dir /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/etc/xdg/autostart/ \ --add-category System \ --add-category Monitor \ --add-category GTK \ print-applet.desktop /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/man/man1' /usr/bin/install -p -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/man/man1' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/troubleshoot' /usr/bin/install -p -m 644 troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/troubleshoot' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/ui' /usr/bin/install -p -m 644 ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/ui' /usr/bin/install -p -m 644 asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/.' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/xml' /usr/bin/install -p -m 644 xml/preferreddrivers.rng xml/validate.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/xml' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/icons' /usr/bin/install -p -m 644 icons/i-network-printer.png '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/icons' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -p troubleshoot/__init__.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer/troubleshoot/' /usr/bin/install -p check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/system-config-printer' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/dbus-1/services/' /usr/bin/install -p -m 644 dbus/org.fedoraproject.Config.Printing.service '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/dbus-1/services/' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/lib/systemd/system' /usr/bin/install -p -m 644 udev/configure-printer@.service '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/lib/systemd/system' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/lib/udev' /usr/bin/install -p udev/udev-configure-printer '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/lib/udev' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/lib/udev' /usr/bin/install -p udev/udev-add-printer '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/lib/udev' /usr/bin/mkdir -p '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/lib/udev/rules.d' /usr/bin/install -p -m 644 udev/70-printers.rules '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/lib/udev/rules.d' make[2]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18' Making install in po make[1]: Entering directory '/builddir/build/BUILD/system-config-printer-1.5.18/po' Makefile:222: warning: ignoring prerequisites on suffix rule definition installing ar.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo installing as.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo installing ast.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ast/LC_MESSAGES/system-config-printer.mo installing bg.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo installing bn_IN.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo installing bn.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo installing br.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo installing bs.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo installing ca.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo installing cs.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo installing cy.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo installing da.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo installing de.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo installing el.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo installing en_GB.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo installing es.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo installing et.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo installing fa.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo installing fi.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo installing fr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo installing fur.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/fur/LC_MESSAGES/system-config-printer.mo installing gu.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo installing he.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo installing hi.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo installing hr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo installing hu.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo installing id.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo installing is.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo installing it.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo installing ja.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo installing ka.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ka/LC_MESSAGES/system-config-printer.mo installing kn.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo installing ko.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo installing lt.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo installing lv.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo installing mai.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo installing ml.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo installing mr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo installing ms.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo installing nb.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo installing nds.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo installing nl.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo installing nn.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo installing oc.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/oc/LC_MESSAGES/system-config-printer.mo installing or.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo installing pa.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo installing pl.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo installing pt_BR.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo installing pt.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo installing ro.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo installing ru.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo installing si.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo installing sk.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo installing sl.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo installing sr@latin.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/sr@latin/LC_MESSAGES/system-config-printer.mo installing sr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo installing sv.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo installing ta.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo installing te.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo installing th.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo installing tr.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo installing uk.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo installing vi.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo installing zh_CN.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo installing zh_TW.gmo as /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo if test "system-config-printer" = "gettext-tools"; then \ /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/gettext/po; \ for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ /usr/bin/install -p -m 644 ./$file \ /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/gettext/po/$file; \ done; \ for file in Makevars; do \ rm -f /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[1]: Leaving directory '/builddir/build/BUILD/system-config-printer-1.5.18/po' + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/var/run/udev-configure-printer + touch /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/var/run/udev-configure-printer/usb-uris + [[ /usr/bin/python3 =~ - ]] + clamp_source_mtime /usr/bin/python3 /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer + python_binary='env /usr/bin/python3' + bytecode_compilation_path=/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer + PYTHONPATH=/usr/lib/rpm/redhat + env /usr/bin/python3 -s -B -m clamp_source_mtime /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer'... Clamping mtime of '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/config.py' Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/icons'... Clamping mtime of '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/options.py' Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/ui'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/xml'... ++ /usr/bin/python3 -c 'import sys; sys.stdout.write('\''{0.major}{0.minor}'\''.format(sys.version_info))' + python_version=312 + '[' 312 -ge 39 ']' + py39_byte_compile /usr/bin/python3 /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer + python_binary='env PYTHONHASHSEED=0 /usr/bin/python3' + bytecode_compilation_path=/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer + env PYTHONHASHSEED=0 /usr/bin/python3 -s -B -m compileall -j6 -o 0 -o 1 -s /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 -p / --hardlink-dupes --invalidation-mode=timestamp /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/config.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/cupspk.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/ppdippstr.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/scp-dbus-service.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/CheckLocalServerPublishing.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/CheckNetworkServerSanity.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/CheckUSBPermissions.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/ErrorLogParse.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/NetworkCUPSPrinterShared.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/QueueNotEnabled.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/Shrug.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/xml/validate.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/applet.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/debug.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/errordialogs.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/gui.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/installpackage.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/killtimer.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/options.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/ppdsloader.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/pysmb.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/serversettings.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/statereason.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/timedops.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/CheckPPDSanity.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/CheckPrinterSanity.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/DeviceListed.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/LocalOrRemote.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/PrintTestPage.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/HIG.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/PhysicalDevice.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/asyncpk1.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/install-printerdriver.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/jobviewer.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/CheckSELinux.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/ChooseNetworkPrinter.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/ErrorLogCheckpoint.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/PrinterStateReasons.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/RemoteAddress.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/ServerFirewalled.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/Welcome.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/base.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/userdefault.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/ToolbarSearchEntry.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/check-device-ids.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/dnssdresolve.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/gtkinklevel.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/monitor.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/printerproperties.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/ChoosePrinter.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/ErrorLogFetch.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/Locale.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/QueueRejectingJobs.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/SchedulerNotRunning.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/VerifyPackages.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot/__init__.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/OpenPrintingRequest.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/asyncconn.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/authconn.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/firewallsettings.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/newprinter.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/SearchCriterion.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/asyncipp.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/optionwidgets.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/ppdcache.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/probe_printer.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/smburi.py'... Compiling '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/system-config-printer.py'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/icons'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/troubleshoot'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/ui'... Listing '/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64//usr/share/system-config-printer/xml'... + /usr/lib/rpm/find-lang.sh /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 system-config-printer + /usr/bin/find-debuginfo -j6 --strict-build-id -m -i --build-id-seed 1.5.18-9.fc41 --unique-debug-suffix -1.5.18-9.fc41.x86_64 --unique-debug-src-base system-config-printer-1.5.18-9.fc41.x86_64 --run-dwz --dwz-low-mem-die-limit 10000000 --dwz-max-die-limit 110000000 -S debugsourcefiles.list /builddir/build/BUILD/system-config-printer-1.5.18 find-debuginfo: starting Extracting debug info from 1 files DWARF-compressing 1 files sepdebugcrcfix: Updated 1 CRC32s, 0 CRC32s did match. Creating .debug symlinks for symlinks to ELF files Copying sources found by 'debugedit -l' to /usr/src/debug/system-config-printer-1.5.18-9.fc41.x86_64 99 blocks find-debuginfo: done + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig + /usr/lib/rpm/brp-compress + /usr/lib/rpm/brp-strip /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/redhat/brp-strip-lto /usr/bin/strip + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/check-rpaths + /usr/lib/rpm/redhat/brp-mangle-shebangs mangling shebang in /usr/bin/system-config-printer from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/install-printerdriver from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/system-config-printer-applet from /bin/sh to #!/usr/bin/sh mangling shebang in /usr/bin/scp-dbus-service from /bin/sh to #!/usr/bin/sh + /usr/lib/rpm/brp-remove-la-files + env SHELL=/bin/bash RPM_SOURCE_DIR=/builddir/build/SOURCES HISTCONTROL=ignoredups PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig HOSTNAME=0cc8a6553fa147d0b8c030828ced743b HISTSIZE=1000 RPM_SPECPARTS_DIR=/builddir/build/BUILD/system-config-printer-1.5.18-SPECPARTS container_host_version_id=39 FFLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules PWD=/builddir/build/BUILD/system-config-printer-1.5.18 SOURCE_DATE_EPOCH=1710892800 LOGNAME=mockbuild CXX=g++ CXXFLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer RPM_ARCH=x86_64 container=systemd-nspawn LDFLAGS=-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes HOME=/builddir LANG=C.UTF-8 RPM_LD_FLAGS=-Wl,-z,relro -Wl,--as-needed -Wl,-z,pack-relative-relocs -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld-errors -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 -specs=/usr/lib/rpm/redhat/redhat-package-notes RUSTFLAGS=-Copt-level=3 -Cdebuginfo=2 -Ccodegen-units=1 -Cstrip=none -Cforce-frame-pointers=yes -Clink-arg=-specs=/usr/lib/rpm/redhat/redhat-package-notes --cap-lints=warn PROMPT_COMMAND=printf "\033]0;\007" RPM_PACKAGE_RELEASE=9.fc41 RPM_OS=linux LT_SYS_LIBRARY_PATH=/usr/lib64: FCFLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -I/usr/lib64/gfortran/modules TERM=vt100 LESSOPEN=||/usr/bin/lesspipe.sh %s USER=mockbuild NOTIFY_SOCKET=/run/host/notify SHLVL=1 RPM_BUILD_DIR=/builddir/build/BUILD container_host_id=fedora RPM_OPT_FLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wno-complain-wrong-lang -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer VALAFLAGS=-g RPM_DOC_DIR=/usr/share/doc RPM_PACKAGE_VERSION=1.5.18 CONFIG_SITE=NONE PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/sbin CC=gcc CFLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -mtls-dialect=gnu2 -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer MAIL=/var/spool/mail/mockbuild RPM_BUILD_NCPUS=6 container_uuid=0d228dd7-7051-45ee-bdda-fc35c8eec4b4 RPM_PACKAGE_NAME=system-config-printer RPM_BUILD_ROOT=/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 OLDPWD=/builddir/build/BUILD _=/usr/bin/env + /usr/lib/rpm/redhat/brp-python-hardlink Processing files: system-config-printer-1.5.18-9.fc41.x86_64 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.d5Tb9Z + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.18 + DOCDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer + export LC_ALL= + LC_ALL= + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ChangeLog /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/NEWS /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ABOUT-NLS /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/AUTHORS /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ChangeLog-OLD /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer + RPM_EC=0 ++ jobs -p + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Zo3tPt + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.18 + LICENSEDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/licenses/system-config-printer + export LC_ALL= + LC_ALL= + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/licenses/system-config-printer + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/COPYING /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/licenses/system-config-printer + RPM_EC=0 ++ jobs -p + exit 0 Provides: application() application(system-config-printer.desktop) metainfo() metainfo(system-config-printer.appdata.xml) system-config-printer = 1.5.18-9.fc41 system-config-printer(x86-64) = 1.5.18-9.fc41 Requires(interp): /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /bin/sh systemd Requires(preun): systemd Requires(postun): systemd Requires: /usr/bin/python3 /usr/bin/sh Processing files: system-config-printer-libs-1.5.18-9.fc41.noarch Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.ePMzoS + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.18 + DOCDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer-libs + export LC_ALL= + LC_ALL= + export DOCDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ChangeLog /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/NEWS /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ABOUT-NLS /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/AUTHORS /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/ChangeLog-OLD /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/doc/system-config-printer-libs + RPM_EC=0 ++ jobs -p + exit 0 Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.yx5Dqg + umask 022 + cd /builddir/build/BUILD + cd system-config-printer-1.5.18 + LICENSEDIR=/builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/licenses/system-config-printer-libs + export LC_ALL= + LC_ALL= + export LICENSEDIR + /usr/bin/mkdir -p /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/licenses/system-config-printer-libs + cp -pr /builddir/build/BUILD/system-config-printer-1.5.18/COPYING /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64/usr/share/licenses/system-config-printer-libs + RPM_EC=0 ++ jobs -p + exit 0 Provides: config(system-config-printer-libs) = 1.5.18-9.fc41 python3.12dist(cupshelpers) = 1 python3dist(cupshelpers) = 1 system-config-printer-libs = 1.5.18-9.fc41 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/python3 /usr/bin/sh python(abi) = 3.12 Recommends: PackageKit PackageKit-glib Suggests: python3-smbc Processing files: system-config-printer-applet-1.5.18-9.fc41.x86_64 Provides: system-config-printer-applet = 1.5.18-9.fc41 system-config-printer-applet(x86-64) = 1.5.18-9.fc41 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/python3 /usr/bin/sh Processing files: system-config-printer-udev-1.5.18-9.fc41.x86_64 Provides: config(system-config-printer-udev) = 1.5.18-9.fc41 system-config-printer-udev = 1.5.18-9.fc41 system-config-printer-udev(x86-64) = 1.5.18-9.fc41 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/python3 libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_ABI_DT_RELR)(64bit) libcups.so.2()(64bit) libglib-2.0.so.0()(64bit) libudev.so.1()(64bit) libudev.so.1(LIBUDEV_183)(64bit) libusb-1.0.so.0()(64bit) rtld(GNU_HASH) Processing files: system-config-printer-debugsource-1.5.18-9.fc41.x86_64 Provides: system-config-printer-debugsource = 1.5.18-9.fc41 system-config-printer-debugsource(x86-64) = 1.5.18-9.fc41 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Processing files: system-config-printer-udev-debuginfo-1.5.18-9.fc41.x86_64 Provides: debuginfo(build-id) = 6fb779107ad8c4dedf50425cf017f0de3338e819 system-config-printer-udev-debuginfo = 1.5.18-9.fc41 system-config-printer-udev-debuginfo(x86-64) = 1.5.18-9.fc41 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Recommends: system-config-printer-debugsource(x86-64) = 1.5.18-9.fc41 Checking for unpackaged file(s): /usr/lib/rpm/check-files /builddir/build/BUILDROOT/system-config-printer-1.5.18-9.fc41.x86_64 Wrote: /builddir/build/RPMS/system-config-printer-applet-1.5.18-9.fc41.x86_64.rpm Wrote: /builddir/build/RPMS/system-config-printer-udev-debuginfo-1.5.18-9.fc41.x86_64.rpm Wrote: /builddir/build/RPMS/system-config-printer-udev-1.5.18-9.fc41.x86_64.rpm Wrote: /builddir/build/RPMS/system-config-printer-debugsource-1.5.18-9.fc41.x86_64.rpm Wrote: /builddir/build/RPMS/system-config-printer-1.5.18-9.fc41.x86_64.rpm Wrote: /builddir/build/RPMS/system-config-printer-libs-1.5.18-9.fc41.noarch.rpm Child return code was: 0